NEC NP-PH1202HL Projector User Manual


  Open as PDF
of 198
 
17
2. Projecting an Image (Basic Operation)
Note on Startup screen (Menu Language Select screen)
Whenyourstturnontheprojector,youwillgettheStartupmenu.Thismenugivesyoutheopportunitytoselectone
ofthe29menulanguages.
Toselectamenulanguage,followthesesteps:
1. Use the ▲, ▼, ◀ or ▶buttontoselectoneofthe29
languagesfromthemenu.
2. Press the ENTER button to execute the selection.
Afterthis hasbeen done,youcan proceedto themenu
operation.
Ifyouwant,youcanselectthemenulanguagelater.
(→[LANGUAGE]onpage72and101)
NOTE:
• WhentheKEYLOCKindicatorisflashing,thatmeans[CONTROLPANELLOCK]hasbeensetandpressingthe button will not
causetheunittopower-on.Release[CONTROLPANELLOCK].(→ page 28)
• WhilethePOWERindicatorisblinkingblueinshortcycles,thepowercannotbeturnedoffbyusingthepowerbutton.(Whilethe
POWERindicatorisblinkingblueinlongcycles,theOFFTIMERisfunctionedandthepowercanbeturnedoff.)
 previous next