NEC NP-PH1202HL Projector User Manual


  Open as PDF
of 198
 
176
9. Appendix
LIGHT Indicator
Indicatordisplay Projectorstatus Procedure
Off
Thelightmoduleis
turnedoff.
–
Flashing Green
TransitiontoswitchON/
OFFthelightmodule
–
Lit Green
Lightmodulelit –
TEMP.Indicator
Indicatordisplay Projectorstatus Procedure
Off
Noproblem
Flashing Red(cycles
of2)
Temperatureproblem Thetemperatureprotectorhasbeenactivated.Iftheroom
temperatureishigh,movetheprojectortoacoolplace.If
theproblemstillpersists,contactanNECprojectorcus-
tomersupportcenter.
Lit Orange Highsurroundingtem-
perature(ForcedECO
Mode)
Thesurrounding temperatureis high. Lowertheroom
temperature.
SHUTTER Indicator
Indicatordisplay Projectorstatus
Off Openshutter
Flashing Green [LENSCALIBRATION]inprogress
Lit Green Shutterclosed
KEYLOCKIndicator
Indicatordisplay Projectorstatus
Off [CONTROLPANELLOCK][OFF]
Lit Orange [CONTROLPANELLOCK][ON]
If the temperature protector is activated
Iftheprojector’sinternaltemperaturerisesabnormally,thelightmoduleturnsoffandthetemperatureindicatorashes
(repeatedlyincyclesof2).
Itmayhappenthattheprojector’stemperatureprotectorissimultaneouslyactivatedandtheprojector’spowerturnsoff.
Ifthishappens,dothefollowing:
- Unplugthepowercordfromthepoweroutlet.
- Ifusinginaplacewherethesurroundingtemperatureishigh,movetheprojectortoadifferent,coolplace.
- Ifthereisdustintheventilationholes,clean.(→page146)
- Waitassuchabout1hourfortheprojector’sinternaltemperaturetolower.
 previous next