NEC NP-PH1202HL Projector User Manual


  Open as PDF
of 198
 
175
9. Appendix
❼ Troubleshooting
Thissectionhelpsyouresolveproblemsyoumayencounterwhilesettinguporusingtheprojector.
Indicator Messages
POWERIndicator
Indicatordisplay Projectorstatus Procedure
Off Powerisoff. –
Flashing
Blue(shortashes) Preparingtoturnpoweron Waitawhile.
Blue(longashes) Offtimer(enabled)
Programtimer(offtimeenabled)
–
Orange(shortashes) Projectorcooling Waitawhile.
Orange(longashes) Programtimer(ontimeenabled) –
Lit Blue
Poweron –
Red Standbymode(NORMAL) –
Orange
Standbymode(HDBaseTSTANDBY) –
STATUS Indicator
Indicatordisplay Projectorstatus Procedure
Off
Noproblem,orSTAND-
BYMODE-“HDBaseT
STANDBY”
–
Flashing
Red(onceper
cycle)
Problemwiththecover Checktomakesurethefrontcover,topcover,sidecover,
andlensunitareallcorrectlyxedinplace.
Red(3times
percycle)
Powerfailure Problemwiththepowersystem.ContacttheNECprojector
customersupportcentertoarrangeforrepair.
Red(4times
percycle)
Problemwiththefan Rotationofthecoolingfanhasstopped.ContacttheNEC
projectorcustomersupportcentertoarrangeforrepair.
Red(6times
percycle)
Problemwiththelight
source
Problemwiththelightsourcesystem.ContacttheNEC
projectorcustomersupportcentertoarrangeforrepair.
Red(9times
percycle)
Hardwareproblem Problemwith thehardware.Contactthe NECprojector
customersupportcentertoarrangeforrepair.
Lit Green STANDBYMODEin
sleepmode*
–
Orange
Buttonhasbeen
pressedwhileprojector
isinkeylockmode
Theprojector’skeysarelocked.Thesettingmustbecan-
celedtooperatetheprojector.(→Page28,112)
Projector’sIDnumber
andremotecontrol’sID
numberdonotmatch
CheckthecontrolIDs.(→Pages113)
* Sleepmodereferstothestatewherebythefunctionalrestrictionsduetothestandbymodesettingareremoved.
 previous next