NEC NP-PH1202HL Projector User Manual


  Open as PDF
of 198
 
24
2. Projecting an Image (Basic Operation)
Focus
NOTE:
• ForlensunitNP-9LS08ZM1,bothcentralandperipheralfocusmustbeadjusted.UsetheFOCUS+/−buttonstoadjustthecentral
focus. If the peripheral focus is off, contact your dealer to have them adjust it.
1. PresstheFOCUS+/−button.
• Ontheremotecontrol,whilepressingontheCTLbutton,pressonVOL/FOCUS(+)or(−)button.
 Thefocusisadjusted.
TIP:Toobtainthebestfocus,performthefollowing(forfixedinstallation)
Preparation:Warmuptheprojectorforonehour.
1.UsetheFOCUS+/−buttonstomakesureyouobtainthebestfocus.Ifyoudonot,movetheprojectorbackandforth.
2.Selectthe[TESTPATTERN]fromthemenuanddisplaythetestpattern.(→ page 76)
• YoucanalsousetheTESTbuttonontheremotecontroltodisplaythetestpattern.
3.KeeppressingtheFOCUS−buttonuntilthegridofthetextpatternismadeinvisible.
4.KeeppressingtheFOCUS+buttonuntilyouobtainthebestfocus.
If you adjust beyond the best focal point, go back to step 3 and repeat the procedures.
Zoom
1. Press the ZOOM +/− button.
• Ontheremotecontrol,whilepressingontheCTLbutton,presstheD-ZOOM/ZOOM(+)or(−)button.
 Thezoomisadjusted.
 previous next