NEC NP-PH1202HL Projector User Manual


  Open as PDF
of 198
 
77
5. Using On-Screen Menu
UsingtheEntryList
Whenyousave[IMAGEOPTIONS]and[LENSMEMORY],theadjustedvaluesofthesignalareautomaticallysavedto
theprojector’s[ENTRYLIST].Whenneeded,thestoredsignaladjustedvaluescanbeaccessedfromthe[ENTRYLIST].
However,onlyupto100patternscanberegisteredintheEntryList.When100patternshavebeenregisteredinthe
EntryList,anerrormessageisthendisplayedandnoadditionalpatternscanberegistered.Youshouldthusdelete
(adjustmentvaluesof)signalsthatarenolongerneeded.
DisplayingtheEntrylist
1. Press the MENU button.
 Themenuwillbedisplayed.
2. Press the ◀ or ▶buttontoselect[INPUT].
 TheINPUTlistwillbedisplayed.
3. Use the ◀, ▶, ▲, or ▼toselect[ENTRYLIST]andpresstheENTERbutton.
 TheENTRYLISTwindowswillbedisplayed.
 IftheENTRYLISTwindowisnotdisplayed,switchthemenuto[ADVANCED].
 Toswitchthemenubetween[ADVANCED]and[BASIC],select[SETUP]→[CONTROL]→[TOOLS]→[ADMIN-
ISTRATORMODE]→[MENUMODE].(→page107)
 previous next