NEC NP-PH1202HL Projector User Manual


  Open as PDF
of 198
 
114
5. Using On-Screen Menu
TurningOnorOffRemoteSensor[REMOTESENSOR]
Thisoptiondetermineswhichremotesensorontheprojectorisenabledinwirelessmode.
Theoptionsare:FRONT/BACK,FRONT,BACK,andHDBaseT.
NOTE:
• TheremotecontroloftheprojectorwillnotbeabletoreceivesignalsifthepowersupplyoftheHDBaseTtransmissiondevice
connectedtotheprojectorisswitchedonwhenthishasbeensetto“HDBaseT”.
TIP:
• Iftheremotecontrolsystemdoesnotfunctionwhendirectsunlightorstrongilluminationstrikestheremotecontrolsensorof
the projector, change another option.
[LENSTYPE]
Dependingonthelensinstalledontheprojector,selecteither[WITHSENSOR]or[WITHOUTSENSOR].
[WITH SENSOR] ................. For the lens units support the lens memory function
[WITHOUT SENSOR]
.......... For the lens units do not support the lens memory function.
 previous next