NEC NP-PH1202HL Projector User Manual


  Open as PDF
of 198
 
120
5. Using On-Screen Menu
[SOURCE OPTIONS]
SettingAutoAdjust[AUTOADJUST]
ThisfeaturesetstheAutoAdjustmodesothatthecomputersignalcanbeautomaticallyormanuallyadjustedfor
noiseandstability.Youcanautomaticallymakeadjustmentintwoways:[NORMAL]and[FINE].
OFF ........................ The computer signal will not be automatically adjusted. You can manually optimize the computer signal.
NORMAL
................ Default setting. The computer signal will be automatically adjusted. Normally select this option.
FINE
....................... Select this option if fine adjustment is needed. It takes more time to switch to the source than when [NOR-
MAL]is selected.
TIP:
• Thedefaultsettingwhenshippedfromthefactoryis[NORMAL].
• WhentheAUTOADJ.buttonispressed,thesame[FINE]adjustmentiscarriedout.
[COLORSYSTEM]
ThisfeatureallowsyoutoselecttheTVvideosignal,whichdiffersfromcountrytocountry(NTSC,PAL,etc.).
Thisissetto[AUTO]byfactorydefault.Setthisiftheprojectorcannotidentifythesignalautomatically.
SelectingDefaultSource[DEFAULTINPUTSELECT]
Youcansettheprojectortodefaulttoanyoneofitsinputseachtimetheprojectoristurnedon.
LAST ...................... Set the projector to default to the previous or last active input each time the projector is turned on.
AUTO
..................... Search for an active source in order of HDMI → DisplayPort → BNC → BNC(CV) → BNC(Y/C) → COMPUTER
→ HDBaseT → SLOT and displays the first found source.
HDMI
..................... Display the digital source from the HDMI IN terminal every time the projector is turned on.
DisplayPort
............ Display the digital source from the DisplayPort IN terminal every time the projector is turned on.
BNC
....................... Project the input signal from the BNC input terminal
BNC(CV)
................ Project the input signal from the BNC(CV) input terminal.
BNC(Y/C)
............... Project the input signal from the BNC(Y/C) input terminal.
COMPUTER
........... Display the computer signal from the COMPUTER IN terminal every time the projector is turned on.
HDBaseT
................ Project the HDBaseT or WIRED LAN signal.
SLOT
...................... Project the picture via the optional board (sold separately) inserted into the SLOT.
 previous next