NEC NP-PH1202HL Projector User Manual


  Open as PDF
of 198
 
31
3. Convenient Features
❽ Changing LIGHT MODE/Checking Energy-Saving Effect
Using LIGHT MODE [LIGHT MODE]
Wheneither[ECO1]or[ECO2]in[LIGHTMODE]isselected,motionnoiseoftheprojectoriscutdownbylowering
brightnessofitslightsource.Bysavingenergyconsumption,theCO
2
emissionfromthisprojectorcanbereduced.
LIGHTMODE
Iconatthebottom
ofthemenu
Description
NORMAL
100%brightness
Thescreenwillbebrightlylit.
ECO1 Brightnesswillbeatabout80%.
Thecoolingfanwillalsoslowdownaccordingly.
Lowerpowerconsumption
ECO2 Brightnesswillbeatabout50%.
Thecoolingfanwillalsoslowdownaccordingly.
Lowerpowerconsumptionconsiderably
LONGLIFE Brightnessisabout90%.
Thissettingspeedsupthecoolingfanandoptimizestheservicelifeof
thelightsource.
* Whenthebrightnessislowered,thecoolingfanspeedwillbereducedaccordingly.
Toturnonthe[LIGHTMODE],dothefollowing:
1. Press LIGHT button on the cabinet.
• Inanotherway,pressECO/L-SHIFTbuttonontheremotecontrol.
 The[LIGHTMODE]screenwillbedisplayed.
2. Press the ENTER button.
 The[LIGHTMODE]selectionscreenwillbedisplayed.
3. Use the ▼▲ buttons to make a selection, and press the ENTER
button.
 Thedisplaywillreturntothe[LIGHTMODE]screenandtheselected
optionwillbeapplied.
 PresstheMENUbuttontoreturntotheoriginalscreen.
 previous next