NEC NP-PH1202HL Projector User Manual


  Open as PDF
of 198
 
151
8. User Supportware
Connect the projector to a LAN.
ConnecttheprojectortotheLANbyfollowingtheinstructionsin“ConnectingtoaWiredLAN”(→page138)and
“[NETWORKSETTINGS]”(→page115)
Start Virtual Remote Tool
Start using the shortcut icon
• Double-clicktheshortcuticon on the Windows Desktop.
Start from the Start menu
• Click[Start]→[AllPrograms]or[Programs]→[NECProjectorUserSupportware]→[VirtualRemoteTool]
→[VirtualRemoteTool].
 WhenVirtualRemoteToolstartsforthersttime,“EasySetup”windowwillbedisplayed.
 The“EasySetup”featureisnotavailableonthismodel.Click“CloseEasySetup”.
 Closingthe“EasySetup”windowwilldisplaythe“ProjectorList”window.
 Selectyourprojectoryouwishtoconnect.ThiswilldisplaytheVirtualRemotescreen.
NOTE:
• When[NORMAL]isselectedfor[STANDBYMODE]fromthemenu,theprojectorcannotbeturnedonvianetworkconnection.
TIP:
• TheVirtualRemoteToolscreen(orToolbar)canbedisplayedwithoutdisplaying“EasySetup”window.
Todoso,clicktoplaceacheckmarkfor“ DonotuseEasySetupnexttime”onthescreen.
 previous next