Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-35
202-10088-01, March 2005
Format no snmptrap mode <name> <ipaddr>
Mode Global Config
snmp trap link-status
This command enables link status traps by interface.
Note: This command is valid only when the Link Up/Down Flag is enabled. See ‘snmp-server enable traps
linkmode’ command.
Format snmp trap link-status
Mode Interface Config
no snmp trap link-status
This command disables link status traps by interface.
Note: This command is valid only when the Link Up/Down Flag is enabled. See ‘snmp-server enable traps
linkmode’ command).
Format no snmp trap link-status
Mode Interface Config
snmp trap link-status all
This command enables link status traps for all interfaces.
Note: This command is valid only when the Link Up/Down Flag is enabled (see “snmp-server enable traps
linkmode” ).
Format snmp trap link-status all
Mode Global Config
no snmp trap link-status all
This command disables link status traps for all interfaces.
Note: This command is valid only when the Link Up/Down Flag is enabled (see “snmp-server enable traps
linkmode”).
Format no snmp trap link-status all
Mode Global Config