Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-75
202-10088-01, March 2005
no sntp multicast client poll-interval
This command will reset the poll interval for SNTP multicast clients to its default value.
Format
no sntp multicast client poll-interval
Mode Global Config
sntp server
This command configures an SNTP server (with a maximum of three) where the server address
can be an ip address or a domain name and the address type either ipv4 or dns. The optional
priority can be a value of 1-3, the version a value of 1-4, and the port id a value of 1-65535.
Format
sntp server <ipaddress/domain-name> <addresstype>
[<priority> [<version> [<portid>]]]
Mode Global Config
no sntp server
This command deletes an server from the configured SNTP servers.
Format
no sntp server remove <ipaddress/domain-name>
Mode Global Config
show sntp
This command is used to display SNTP settings and status.
Format
show sntp
Mode Privileged Exec
Last Update Time Time of last clock update.
Last Attempt Time Time of last transmit query (in unicast mode).
Last Attempt Status Status of the last SNTP request (in unicast mode) or unsolicited
message (in broadcast mode).
Broadcast Count Current number of unsolicited broadcast messages that have been
received and processed by the SNTP client since last
reboot.