NETGEAR NETGEAR Switch User Manual


 
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
11-34 Quality of Service (QoS) Commands
202-10088-01, March 2005
ing action. It may also be specified along with a QoS queue
assignment.
If the Policy Name is specified the following fields are displayed:
Policy Name The name of this policy.
Type The policy type, namely whether it is an inbound or outbound
policy definition.
The following information is repeated for each class associated with this policy (only those policy attributes
actually configured are displayed):
Class Name The name of this class.
Mark CoS Denotes the class of service value that is set in the 802.1p header
of outbound packets. This is not displayed if the mark cos was not
specified.
Mark IP DSCP Denotes the mark/re-mark value used as the DSCP for traffic
matching this class. This is not displayed if mark ip description is
not specified using the police-two-rate command, or if policing is
in use for the class under this policy.
Mark IP Precedence Denotes the mark/re-mark value used as the IP Precedence for
traffic matching this class. This is not displayed if precedence is
not specified using police-two-rate command, or if either mark
DSCP or policing is in use for the class under this policy.
Policing Style This field denotes the style of policing, if any, used (simple, sin-
gle rate, or two rate).
Committed Rate (Kbps) This field displays the committed rate, used in simple policing,
single-rate policing, and two-rate policing.
Committed Burst Size (KB) This field displays the committed burst size, used in simple
policing, single-rate policing, and two-rate policing.
Excess Burst Size (KB) This field displays the excess burst size, used in single-rate polic-
ing.
Peak Rate (Kbps) This field displays the peak rate, used in two-rate policing.
Peak Burst Size (KB) This field displays the peak burst size, used in two-rate policing.
Conform Action The current setting for the action taken on a packet considered to
conform to the policing parameters. This is not displayed if polic-
ing is not in use for the class under this policy.