Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-91
202-10088-01, March 2005
Format option <code> {ascii string | hex <string1>
[<string2>...<string8> ] | ip <address1>
[<address2>...<address8> ]}
Mode DHCP Pool Config
no option
This command removes the options.
Format no option <code>
Mode DHCP Pool Config
show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
Format show ip dhcp binding [address]
Modes Privileged EXEC
User EXEC
IP address The IP address of the client.
Hardware Address The MAC Address or the client identifier.
Lease expiration The lease expiration time of the IP Address assigned to the client.
Type The manner in which IP Address was assigned to the client.
show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
Format show ip dhcp global configuration
Modes Privileged EXEC
User EXEC
Service DHCP The field to display the status of dhcp protocol.
Number of Ping Packets The maximum number of Ping Packets that will be sent to verify
that an ip address id not already assigned.