Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
10-18 Routing Commands
202-10088-01, March 2005
Requests Received Is the number or requests received.
Requests Relayed Is the number of requests relayed.
Packets Discarded Is the number of packets discarded.
Router Discovery Protocol Commands
This chapter provides a detailed explanation of the Router Discovery commands. The commands
are divided by functionality into the following different groups:
• Show commands are used to display switch settings, statistics and other information.
• Configuration Commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
• Copy commands are used to transfer configuration and informational files to and from the
switch.
ip irdp
This command enables Router Discovery on an interface.
Default
enabled
Format ip irdp
Mode Interface Config
no ip irdp
This command disables Router Discovery on an interface.
Format
no ip irdp
Mode Interface Config
ip irdp address
This command configures the address to be used to advertise the router for the interface. The valid
values for ipaddr are 224.0.0.1 and 255.255.255.255.
Default
224.0.0.1
Format ip irdp address <ipaddr>