Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
11-4 Quality of Service (QoS) Commands
202-10088-01, March 2005
no mac access-group <name> {in|out}
This command removes a MAC ACL identified by <name> from the interface in a given direction.
Format no mac access-list <name> {in|out}
Mode Global Config or Interface Config
show mac access-list <name>
This command displays a MAC access list and all of the rules that are defined for the ACL. The
<name> parameter is used to identify a specific MAC ACL to display.
Format show mac access-list <name>
Mode Privileged EXEC
Rule Number
The ordered rule number identifier defined within the ACL.
Action Displays the action associated with each rule. The possible val-
ues are Permit or Deny.
Source MAC Address Displays the source MAC address for this rule.
Source MAC Mask Displays the source MAC mask for this rule.
Destination MAC Address Displays the destination MAC address for this rule.
Destination MAC Mask Displays the destination MAC mask for this rule.
Ethertype Displays the Ethertype keyword or custom value for this rule.
VLAN ID Displays the VLAN identifier value or range for this rule.
COS Displays the COS (802.1p) value for this rule.
Secondary VLAN ID Displays the Secondary VLAN identifier value or range for this
rule.
Secondary COS Displays the Secondary COS (802.1p) value for this rule.
Assign Queue Displays the queue identifier to which packets matching this rule
are assigned.
Redirect Interface Displays the slot/port to which packets matching this rule are for-
warded.
show mac access-lists
This command displays a summary of all defined MAC access lists in the system.
Format show mac access-lists
Mode Privileged EXEC
Name
The name of the MAC access list.
Number of Rules The number of user-configured rules defined for this ACL.