Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-77
202-10088-01, March 2005
Address Type Address Type of configured SNTP server.
Priority IP priority type of the configured server.
Version SNTP Version number of the server. The protocol version used to
query the server in unicast mode.
Port Server Port Number
Last Attempt Time Last server attempt time for the specified server.
Last Attempt Status Last server attempt status for the server.
Total Unicast Requests Number of requests to the server.
Failed Unicast Requests Number of failed requests from server.
User Account Commands
These commands manage user accounts. The commands are divided into two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.
disconnect
This command closes a telnet session.
Format
disconnect {<sessionID> | all}
Mode Privileged EXEC
show loginsession
This command displays current telnet and serial port connections to the switch.
Format
show loginsession
Mode
Privileged EXEC
ID Login Session ID
User Name The name the user will use to login using the serial port or Telnet.
A new user may be added to the switch by entering a name in a
blank entry. The user name may be up to 8 characters, and is not