Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Routing Commands 10-27
202-10088-01, March 2005
no ip rip send version
This command configures the interface to allow RIP control packets of the default version to be
sent.
Format
no ip rip send version
Mode Interface Config
hostroutesaccept
This command enables the RIP hostroutesaccept mode.
Default
enabled
Format hostroutesaccept
Mode Router RIP Config
no hostroutesaccept
This command disables the RIP hostroutesaccept mode.
Format
no hostroutesaccept
Mode Router RIP Config
split-horizon
This command sets the RIP split horizon mode.
Default
simple
Format split-horizon {none | simple | poison}
Mode Router RIP Config
no split-horizon
This command sets the default RIP split horizon mode.
Format
no split-horizon
Mode Router RIP Config