Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-113
202-10088-01, March 2005
Fast Leave Mode This indicates whether or not IGMP Snooping Fast-leave is active on the
VLAN.
Group Membership Interval Time
The Group Membership Interval time is the amount of time in
seconds that a switch will wait for a report from a particular group on a particu-
lar interface, which is participating in the VLAN, before deleting the interface
from the entry.This value may be configured
Max Response Time This displays the amount of time the switch will wait after sending a query on an
interface, participating in the VLAN, because it did not receive a report for a
particular group on that interface. This value may be configured.
Multicast Router Present Expiration Time If a query is not received on an interface, participating
in the VLAN, within this amount of time, the interface is removed from the list
of interfaces with multicast routers attached. This value may be configured.
Link Aggregation (LAG)/Port-Channel (802.3AD) Commands
This section provides a detailed explanation of the LAG commands. The LAG feature initially
load balances traffic based upon the source and destination MAC address. If an ARP entry is
learned on the LAG then the LAG is converted to load balance based upon source/destination IP
address.
The commands are divided into two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.
port-channel staticcapability
This command enables the support of port-channels (static link aggregations - LAGs) on the
device. By default, the static capability for all port-channels is disabled.
Default disabled
Format
port-channel staticcapability
Mode Global Config