Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-136 Switching Commands
202-10088-01, March 2005
Root Port Bridge Forward Delay Derived value
Hello Time
Configured value
Bridge Hold Time Minimum time between transmission of Configuration Bridge Protocol Data
Units (BPDUs)
Bridge Max Hops Bridge max-hops count for the device.
CST Regional Root
Regional Root Path Cost
Associated FIDs List of forwarding database identifiers currently associated with this instance.
Associated VLANs List of VLAN IDs currently associated with this instance.
When the “brief” optional parameter is included, this command displays spanning tree settings for
the bridge. In this case, the following details are displayed.
Bridge Priority Configured value.
Bridge Identifier
Bridge Max Age Configured value.
Bridge Max Hops
Bridge max-hops count for the device.
Bridge Hello Time Configured value.
Bridge Forward Delay Configured value.
Bridge Hold Time Minimum time between transmission of Configuration Bridge
Protocol Data Units (BPDUs)
show spanning-tree interface
This command displays the settings and parameters for a specific switch port within the common
and internal spanning tree. The <slot/port> is the desired switch port. The following details are
displayed on execution of the command.
Format show spanning-tree interface <slot/port>
Mode Privileged EXEC and User EXEC
Hello Time Admin hello time for this port
Port mode
Enabled or disabled.
Port Up Time Since Counters Last Cleared Time since port was reset, displayed in days, hours,
minutes, and seconds.