Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-56 Switching Commands
202-10088-01, March 2005
Format no protocol vlan group all <groupid>
Mode Global Config
vlan pvid
This command changes the VLAN ID per interface.
Default 1
Format
vlan pvid <1-4094>
Mode Interface Config
no vlan pvid
This command sets the VLAN ID per interface to 1.
Format
no vlan pvid
Mode Interface Config
vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The ID is a valid VLAN identification number.
Format
vlan tagging <1-4094>
Mode Interface Config
no vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to disabled. If
tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN
identification number.
Format
no vlan tagging <1-4094>
Mode Interface Config
show vlan
This command displays detailed information, including interface information, for a specific
VLAN. The ID is a valid VLAN identification number