Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
11-6 Quality of Service (QoS) Commands
202-10088-01, March 2005
no access-list
This command deletes an ACL that is identified by the parameter <accesslistnumber> from the
system
.
Format no access-list <accesslistnumber>
Mode Global Config
ip access-group
This command attach a specified access-control list to an interface.
Default none
Format
ip access-group <accesslistnumber> <in | out>
Mode Interface Config
ip access-group all
This command attach a specified access-control list to all interfaces.
Default none
Format
ip access-group all <accesslistnumber> <in | out>
Mode Global Config
show ip access-lists
This command displays an Access Control List (ACL) and all of the rules that are defined for the
ACL. The <
accesslistnumber> is the number used to identify the ACL.
Format
show ip access-lists <accesslistnumber>
Mode Privileged EXEC and User EXEC
Rule Number This displays the number identifier for each rule that is defined
for the ACL.
Action This displays the action associated with each rule. The possible
values are Permit or Deny.
Protocol This displays the protocol to filter for this rule.
Source IP Address This displays the source IP address for this rule.