Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-86 Switching Commands
202-10088-01, March 2005
Format ip dhcp pool <name>
Mode Global Config Mode
no ip dhcp pool
This command removes the DHCP address pool. The name should be previously configured pool
name.
Format no ip dhcp pool <name>
Mode Global Config Mode
lease
This command configures the duration of the lease for an IP address that is assigned from a DHCP
server to a DHCP client. The overall lease time should be between 1-86400 minutes. If infinite is
specified, lease is set for 60 days. Days is an integer from 0 to 59. Hours is an integer from 0 to
1439. Minutes is an integer from 0 to 86399.
Default
1 (day)
Format lease {[<days> [hours] [minutes]] | [infinite]}
Mode DHCP Pool Config
no lease
This command restores the default value of the lease time for DHCP Server.
Format no lease
Mode DHCP Pool Config
network
This command is used to configure the subnet number and mask for a DHCP address pool on the
server. Network-number is a valid IP address, made up of four decimal bytes ranging from 0 to
255. IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the specified address pool. The
prefix-length is an integer from 0 to 32.
Default
none
Format network <networknumber> [mask | prefixlength]
Mode DHCP Pool Config