Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
C-14 Glossary
202-10088-01, March 2005
Routers (LSRs) place outgoing labels on the packets. With these LSPs, network operators can divert and
route traffic based on data-stream type and Internet-access customer.
MUX
See “Multiplexing” on page 13.
N
NAT
See “Network Address Translation” on page 14.
netmask
Combined with the IP address, the IP Subnet Mask allows a device to know which other addresses are local
to it, and which must be reached through a gateway or router.
A number that explains which part of an IP address comprises the network address and which part is the host
address on that network. It can be expressed in dotted-decimal notation or as a number appended to the IP
address. For example, a 28-bit mask starting from the MSB can be shown as 255.255.255.192 or as /28
appended to the IP address.
Network Address Translation
Sometimes referred to as Transparent Proxying, IP Address Overloading, or IP Masquerading. Involves use
of a device called a Network Address Translator, which assigns a contrived, or logical, IP address and port
number to each node on an organization's internal network and passes packets using these assigned
addresses.
nm
Nanometer (1 x 10e
9
) meters.
non-stub area
Resource-intensive OSPF area that carries a default route, static routes, intra-area routes, interarea routes,
and external routes. Non-stub areas are the only OSPF areas that can have virtual links configured across
them, and are the only areas that can contain an ASBR. Compare with stub area. See also ASAM and OSPF.
(Cisco Systems Inc.)
O
Open Shortest Path First
A link- state (algorithm used by the router to determine the current topology of a network), Interior Gateway
(distributes routing information between routers belonging to a single Autonomous System) routing