Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
10-4 Routing Commands
202-10088-01, March 2005
arp retries
This command configures the ARP count of maximum request for retries.
The value for <retries> is an integer, which represents the maximum number of request for retries.
The range for <retries> is an integer between 0-10 retries.
Default
4
Format arp retries <0-10>
Mode Global Config
no arp retries
This command configures the default ARP count of maximum request for retries.
Format
no arp retries
Mode Global Config
arp timeout
This command configures the ARP entry ageout time.
The value for <seconds> is a valid positive integer, which represents the IP ARP entry ageout time
in seconds. The range for <seconds> is between 15-21600 seconds.
Default
1200
Format arp timeout <15-21600>
Mode Global Config
no arp timeout
This command configures the default ARP entry ageout time.
Format
no arp timeout
Mode Global Config
clear arp-cache
This command causes all ARP entries of type dynamic to be removed from the ARP cache. If the
gateway parameter is specified, the dynamic entries of type gateway are purged as well.