Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-60 Switching Commands
202-10088-01, March 2005
clear config
This command resets the configuration to the factory defaults without powering off the switch.
The switch is automatically reset when this command is processed. You are prompted to confirm
that the reset should proceed.
Format
clear config
Mode
Privileged EXEC
clear counters
This command clears the stats for a specified <slot/port>or for all the ports or for the entire switch
based upon the argument.
Format
clear counters {<slot/port> | all}
Mode Privileged EXEC
clear igmpsnooping
This command clears the tables managed by the IGMP Snooping function and will attempt to
delete these entries from the Multicast Forwarding Database.
Format
clear igmpsnooping
Mode Privileged EXEC
clear pass
This command resets all user passwords to the factory defaults without powering off the switch.
You are prompted to confirm that the password reset should proceed.
Format
clear pass
Mode Privileged EXEC
enable passwd
This command changes the Privileged EXEC password. First type the command then hit the enter
or the return key.
Format
enable passwd