Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-55
202-10088-01, March 2005
protocol vlan group
This command adds the physical <slot/port> interface to the protocol-based VLAN identified by <groupid>. A group
may have more than one interface associated with it. Each interface and protocol combination can only be associated
with one group. If adding an interface to a group causes any conflicts with protocols currently associated with the group,
this command will fail and the interface(s) will not be added to the group.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN except
when GVRP is expected to create the VLAN.
Default none
Format
protocol vlan group <groupid>
Mode Interface Config
no protocol vlan group
This command removes the <interface> from this protocol-based VLAN group that is identified by this <groupid>.
If <all> is selected, all ports will be removed from this protocol group.
Format no protocol vlan group <groupid>
Mode Interface Config
protocol vlan group all
This command adds all physical interfaces to the protocol-based VLAN identified by <groupid>. A group may have
more than one interface associated with it. Each interface and protocol combination can only be associated with one
group. If adding an interface to a group causes any conflicts with protocols currently associated with the group, this
command will fail and the interface(s) will not be added to the group.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN except
when GVRP is expected to create the VLAN.
Default none
Format
protocol vlan group all <groupid>
Mode Global Config
no protocol vlan group all
This command removes all interfaces from this protocol-based VLAN group that is identified by
this <groupid>.