NETGEAR NETGEAR Switch User Manual


 
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Security Commands 9-17
202-10088-01, March 2005
Note that the login list associated with the ‘admin’ user can not be changed to prevent accidental
lockout from the switch.
Format
users login <user> <listname>
Mode Global Config
Remote Authentication Dial In User Service (RADIUS)
Commands
This section provides a detailed explanation of the RADIUS commands. The commands are
divided into the following groups:
Configuration commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
Show commands are used to display switch settings, statistics and other information.
radius accounting mode
This command is used to enable the RADIUS accounting function.
Default
disabled
Format radius accounting mode
Mode Global Config
no radius accounting mode
This command is used to set the RADIUS accounting function to the default value - i.e. the
RADIUS accounting function is disabled.
Format no radius accounting mode
Mode
Global Config
radius server host
This command is used to configure the RADIUS authentication and accounting server.