Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-68 Switching Commands
202-10088-01, March 2005
Default disabled; critical
Format logging console [severitylevel]
Mode Global Config
no logging console
This command disables logging to the console.
Format
no logging console
Mode Global Config
logging history
This command enables logging of system startup and system operation logs to storage. The
<severitylevel> value is specified as either an integer from 0 to 7 or symbolically through one of
the following keywords: EMERGENCY (0), ALERT (1), CRITICAL (2), ERROR (3),
WARNING (4), NOTICE (5), INFORMATIONAL (6), DEBUG (7).
Default
enabled; severitylevel - critical
Format logging history [severitylevel]
Mode Global Config
no logging history
This command disables logging. It does not clear the contents of the log.
Format
no logging history
Mode Global Config
logging host
This command enables logging to a host where up to eight hosts can be configured. AddressType
can be ipv4 or dns, port can be of a value from
Default
Port - 514; Level - Critical;
Format logging host <ipaddress> <addresstype> [port <port>]
[level <severitylevel>]
Mode Global Config