Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Routing Commands 10-3
202-10088-01, March 2005
arp dynamicrenew
This command enables ARP component to automatically renew ARP entries of type dynamic
when they age out.
Format
arp dynamicrenew
Mode Privileged Exec
no arp dynamicrenew
This command disables ARP component from automatically renewing ARP entries of type
dynamic when they age out.
Format
no arp dynamicrenew
Mode Privileged Exec
arp purge
This command causes the specified IP address to be removed from the ARP cache. Only entries of
type dynamic or gateway are affected by this command.
Format
arp purge <ipaddr>
Mode Privileged EXEC
arp resptime
This command configures the ARP request response timeout.
The value for <seconds> is a valid positive integer, which represents the IP ARP entry response
timeout time in seconds. The range for <seconds> is between 1-10 seconds.
Default
l
Format arp resptime <1-10>
Mode Global Config
no arp resptime
This command configures the default ARP request response timeout.
Format
no arp resptime
Mode Global Config