Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-23
202-10088-01, March 2005
Mode Line Config
set prompt
This command changes the name of the prompt. The length of name may be up to 64 alphanumeric
characters.
Format
set prompt <prompt string>
Mode Privileged EXEC
serviceport ip
This command sets the IP address, the netmask and the gateway of the router.
Format
serviceport ip <ipaddr> <netmask> [gateway]
Mode Privileged EXEC
serviceport protocol
This command specifies the servicePort configuration protocol. If you modify this value, the
change takes effect immediately.
Format
serviceport protocol {none | bootp | dhcp}
Mode Privileged EXEC
show telnet
This command displays the current outbound telnet settings.
Format
show telnet
Modes Privileged EXEC
User EXEC
Outbound Telnet Login Timeout (in minutes) Indicates the number of minutes an outbound telnet
session is allowed to remain inactive before being logged off. A value of 0, which is the default,
results in no timeout.
Maximum Number of Outbound Telnet Sessions Indicates the number of simultaneous outbound
telnet connections allowed.