Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-76 Switching Commands
202-10088-01, March 2005
Multicast Count Current number of unsolicited multicast messages that have been
received and processed by the SNTP client since last
reboot
show sntp client
This command is used to display SNTP client settings.
Format
show sntp client
Mode Privileged Exec
Client Supported Modes Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Version The highest SNTP version the client supports
Port SNTP Client Port
Client Mode: Configured SNTP Client Mode
Poll Interval Poll interval value for SNTP clients in seconds as a power of two.
Poll Timeout Poll timeout value in seconds for SNTP clients.
Poll Retry Poll retry value for SNTP clients.
show sntp server
This command is used to display SNTP server settings and configured servers.
Format
show sntp server
Mode Privileged Exec
Server IP Address IP Address of configured SNTP Server
Server Type Address Type of Server.
Server Stratum Claimed stratum of the server for the last received valid packet.
Server Reference ID Reference clock identifier of the server for the last received valid
packet.
Server Mode SNTP Server mode.
Server Max Entries Total number of SNTP Servers allowed.
Server Current Entries Total number of SNTP configured.
For each configured server:
IP Address IP Address of configured SNTP Server.