Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Quality of Service (QoS) Commands 11-11
202-10088-01, March 2005
class-map rename
This command changes the name of a DiffServ class. The <classname> is the name of an existing
DiffServ class. The
<newclassname> parameter is a case-sensitive alphanumeric string from 1 to
31 characters uniquely identifying the class (Note: the class name ‘default’ is reserved and must
not be used here).
Default none
Format
class-map rename <classname> <newclassname>
Mode Global Config
match ethertype
This command adds to the specified class definition a match condition based on the value of the
ethertype. The <
ethertype> value is specified as one of the following keywords: appletalk, arp,
ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast, netbios, novell, pppoe, rarp or as a custom ethertype value in the
range of 0x0600-0xFFFF.
Format match [not] ethertype {<keyword> | custom <0x0600-
0xFFFF>}
Mode Class-Map Config
match secondary-cos
This command adds to the specified class definition a match condition for the secondary Class of
Service value (the inner 802.1Q tag of a double VLAN tagged packet). The value may be from 0 to
7.
Format
match [not] secondary-cos <0-7>
Mode Class-Map Config
match secondary-vlan
This command adds to the specified class definition a match condition for the secondary VLAN
identifier value (the inner 802.1Q tag of a double VLAN tagged packet). The range from
vlanmin
and vlanmax
are integers from 1 to 4094 with vlanmax being optional.
Format
match [not] secondary-vlan <vlanmin> [<vlanmax>]
Mode Class-Map Config