Filter
Top Products
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
11-44 Quality of Service (QoS) Commands
202-10088-01, March 2005
random-detect exponential-weighting-constant
This command sets the decay exponent used by the WRED average queue depth calculation for the
interface.
Format random-detect exponential-weighting-constant <1-15>
Modes Global Config
Interface Config
no random-detect exponential-weighting-constant
This command restores the default value.
Format no random-detect exponential-weighting-constant
Modes Global Config
Interface Config
random-detect queue-parms
This command sets the WRED parameters for each drop precedence level supported by a queue.
The actual number of queue drop precedence levels is platform-specific. Use the 'no' form of this
command to restore the default values for the queue WRED parameters.
Format random-detect queue-parms <queue-id-1> [<queue-id-2>
… <queue-id-n>] min-thresh <0-16> <0-16> <0-16> max-
thresh <min-16> <min-16> <min-16> drop-prob-scale <1-
15> <1-15> <1-15>
Modes Global Config
Interface Config
no random-detect queue-parms
Format no random-detect queue-parms <queue-id-1> [<queue-id-
2> … <queue-id-n>]
Modes Global Config
Interface Config
tail-drop queue-parms
This command sets the tail drop threshold parameter for each drop precedence level supported by
a queue. The total number of queue drop precedence levels is platform-specific. Use the 'no' form
of this command to restore the default values for the queue tail drop threshold parameters.