NETGEAR NETGEAR Switch User Manual


 
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Quality of Service (QoS) Commands 11-43
202-10088-01, March 2005
Modes Global Config
Interface Config
cos-queue strict
This command activates the strict priority scheduler mode for each specified queue.
Format cos-queue strict <queue-id-1> [<queue-id-2> … <queue-
id-n>]
Modes Global Config
Interface Config
no cos-queue strict
This command restores the default weighted scheduler mode for each specified queue.
Format no cos-queue strict <queue-id-1> [<queue-id-2> …
<queue-id-n>]
Modes Global Config
Interface Config
random-detect
This command is used to enable WRED for the interface as a whole, and is only available when
per-queue WRED activation control is not supported by the device. Specific WRED parameters
are configured using the 'random-detect queue-parms' and the 'random-detect exponential-
weighting-constant' commands.
Format random-detect
Modes Global Config
Interface Config
no random-detect
This command disables WRED, thereby restoring the default tail drop operation for all queues on
the interface.
Format no random-detect
Modes Global Config
Interface Config