Oki 24DX Printer User Manual


 
Category LCD status message Trouble or status Remedy
40930701TH DRAFT Vesion
126 /
Daily status Indicates that the face down stacker is full with sheets.
Indicates that no paper or paper cassette in a tray.
IIndicates that, in an attempt to use the third tray, the first or second
tray which is the medium of the path is pulled out.
Indicates that, in an attempt to use the second tray, the first tray which
is the medium of the path is pulled out.
Provisions: The first and second tray should be returned.
Requests that a sheet indicated in the first line message is inserted.
Indicates that the interpreter detects an error due to the following
reasons. From this point on, the receiving data is flushed until the
completion of a job. It is automatically canceled when job receiving is
completed.
Indicates that the capacity of memory is Overflowed due to the
following reasons. The operation is continued by pressing Recover
switch. Additional RAM should be installed or the amount of data be
reduced.
-Too large printing data within one page.
-Too large macro data.
-Too large DLL data.
-Overflow after the compression of frame buffer.
STACKER FULL
REMOVE THE PAPER
PAPER OUT
mmmmmmmmmm tttttt
tttttt INSTALL
mmmmmmmmm tttttt
PAPER REQUEST
Remove the paper from the stacker.
Repair the broker stacker sensor cable.
Repeat the insertion and removal of the connector.
Clean or replace the stacker full sensor.
Load a paper or paper cassette to the tray.
Install the displayed tray.
Load the requested paper in tray.
Warnig.
Check the print job format.
Press the RECOVER key on the operator panel to release
the error display.
Install an expansion optional RAM or reduce the amount of
print data.
ERROR POSTSCRIPT
ERROR MEMORY
OVERFLOW
READY
ATTENTION
READY
ATTENTION
READY
ATTENTION
READY
ATTENTION
READY
ATTENTION
READY
ATTENTION