Filter
Top Products
40930701TH DRAFT Vesion 140 /
2-3 Paper feed jam
• Does a paper feed jam occur when the power is turned on?
• Yes Is the paper on the paper sensor lever?
• Yes Remove the paper.
▼
• No Does the paper sensor lever operate smoothly?
• No Replace the paper sensor lever.
▼
• Yes Clean the paper sensor. (See Figure 2-3 Sensor Layout Diagram.)
▼
• Is the printer recovered?
• No Replace the Power Supply Unit (High Voltage).
▼
• YES END
▼
• No Has the paper reached the paper sensor lever?
• No Is the Drum motor rotating?
• No Go to on the next page .
▼
• Yes Is the cluch for register roller (N0.44 in Figure 8-2) turned on ?
• No Is a cable from the clutch connected to "CLR" connector on
the main board ?
▼
• Yes Replace the Clutch.
▼
• Is the printer recovered?
▼
• No Replace the Main board.
▼
• YES END
▼
Go to on the next page
A
.
▼
Go to on the next page
B
.
C