Filter
Top Products
40930701TH DRAFT Vesion 226 /
3.3.3 Square-shaped connector
(1) Remove the upper cover and remove the cover frame 5 (see 3.3.1 (1) to (4)).
(2) Remove the AOLE-PCB (see 3.3.2).
(3) Remove the screw 1 and remove the square-shaped connector 2.
(4) Using the connector remover, remove the nylon cord 3 from the square-shaped connector
2.
5
1
4
2
3
[Confirmation after assembly]
1. The square connector 2 should be horizontal to the cover frame 5.
2
4
5
2. The square connector 2 should be hooked on the connector spring 4 and move smoothly.
2
5