Filter
Top Products
40930701TH DRAFT Vesion 64 /
3.3.6 Stacker Assy, Damper Arm, Cover Rear
(1) Remove the face-up stacker assy. [See 3.3.1]
(2) Remove the cover-side (L). [See 3.3.2 (1)]
(3) Remove the OP panel assy. [See 3.3.4]
(4) Remove the Board-FFF. [See 3.3.5]
(5) Loosen 2 screws, unlock the both sides latches and remove the cover rear A.
(6) Unscrew 2 screws 1 and cover frame 2.
(7) Unscrew 3 screws 3 and remove the plate assy-side (R) 4.
(8) Remove the lever back up release 5 and unlock the engagement of the projection on the
right side of gear at the right side of stacker cover.
(9) Remove a screw 6 and washer 7, and then remove the stacker assy 8.
(At this time, the damper arm 9 can also be detached simultaneously.)
8
A
9
0
2
5
7
1
4
3
6