Filter
Top Products
40930701TH DRAFT Vesion 233 /
4.3.1 LCD Status Message List
The listing of the statuses and problems displayed in the form of messages on the LCD is provided
in Table 4-1.
Table 4-1
PAPER INPUT JAM
CHECK FEEDER
PAPER FEED JAM
CHECK FEEDER
ERROR PAPER SIZE
CHECK FEEDER
ERROR
81
Classification LCD Status Message Description Recovery method
Jam error
Paper size error
Tray paper out
Interface Timeout
Notifies of occurrence of
jam while the paper is being
fed from the Multi Feeder.
Notifies of incorrect size pa-
per feeding from the Multi
Feeder.
Notifies of no paper state of
the Multi Feeder.
Notifies of occurrence of
interface timeout between
the printer and the Multi
Feeder.
• Check the paper in the Multi Feeder.
Carry out the recovery printing by
opening the cover, removing jammed
paper and closing the cover, and then
turning the error display off.
• When the problem occurs frequently,
to through the Troubleshooting.
• Check the paper in the Multi Feeder.
Also check to see if there was a feed-
ing of multiple sheets.
Carry out the recovery printing by
opening the cover, removing paper
and closing the cover, and then turn-
ing the error display off.
• Load the paper in the Multi Feeder.
• Verify connection of AOLE-PCB and
square-shaped connector.
Replace the square-shaped connec-
tor if necessary.
• Replace AOLE-PCB.
PAPER OUT
mmmmmmmm FEEDER
mmmmmmmm
:
Paper size in the tray
being selected