Filter
Top Products
40930701TH DRAFT Vesion 32 /
(2) Feeding
After the end of hopping, the pulse motor dedicated for driving the registration roller rotates
to drive the registration roller. The driven registration roller advances the paper until it comes
out of the registration roller.
When leading edge of the paper causes the paper sensor to turn on, the printing is started
synchronously.
Although Gear D is always rotating due to an all-time rotation of the main motor in direction
c, the regist roller would not rotate because the clutch (regist) is turned off.
After the completion of hopping, turn on the clutch (regist) to drive the regist roller. The regist
roller would drive a paper until the paper has passed.
c
Main Motor
Clutch (Regist)
Gear E
Regist Roller
Pressure Roller
Inlet Sensor
Write Sensor
Clutch (Feed)
Gear D
Align Roller