Filter
Top Products
40930701TH DRAFT Vesion 142 /
From on the preceding page
A
.
▼
• No Is the transfer roller rotating smoothly?
• No Is there any defective gear of the transfer roller?
• Yes Replace the defective gear.
▼
• No Replace the transfer roller.
▼
• No Is the fuser unit installed properly?
• No Install the fuser unit properly.
▼
• No Is the image drum cartridge set properly?
• No Set the image drum cartridge properly.
▼
• No Does the paper sensor lever operate smoothly?
• No Replace the paper sensor lever.
▼
• Yes Clean the paper sensor on the Power Supply Unit (High Voltage).
(See Figure 2-3 Sensor Layout Diagram.)
▼
• Is the printer recovered?
• No Replace the Power Supply Unit (High Voltage).
▼
• YES END