Filter
Top Products
Switching to tone alerting
LIFT THE HANDSET DIALTHE
OR PRESS
“SP-PHONE”
EXTENSION CONFIRMATION
NUMBER
TONE IS HEARD
PRESS “3~”
RING BACK
TONE
Description
“Voice alerting” (thibugh built-in speaker) that
is,esrablished at the called party’s extension, can
be switched to “Tone alerting” (ringing).
This feature is required to be set beforehand in
the KY-T61610. For programming, see page
3-31.
Operation
h
1. Lift the handset or press the SP-PHONE
button.
2. Dial the extension tiumber.
3.
Wait for a confirmation tone after inter office
calling.
4. Press the ++ button.
The ring back tone will be heard.
Tone Ringer on the called party’s extension
will
be ready-
to
be
activated.
--
Description
.-
Lamp indicators corresponding to the status of
the CO (Central Office) and the ICM (Inter-
com) buttons.
Explanation
l
ICM indicator light
on
slowflashing
flashing in
groups of 2
quickflashing
QB CO indicator light
4-32
bin use for intercom
*in use for CO line
o which the CO line
number is not
assigned.
on hold
on exclusive hold
ereceving an
incoming intercom
call
@receiving an
ncoming outside cal
to
which the ‘CO lint
number is not
assigned.
1
~
..,::‘:.“.y 1. -“. I:.‘:
idle
on (green color) 1
in use
slow flashing
(green color)
on hold
.
flashing in
groups of 2
on exclusive hold
(green color)
.-
on (red color) :G: ”
in use at another
extension
slow flashing
(red color)
on hold at anofher
extension
.
quickflashing
(red &or)
receiving an
incoming outside call
J