Filter
Top Products
1. Connect the cord from the optional KX-Al6 to
the KX-T61610.
2. Plug in the AC power cord from the KX-A16.
3. Turn on the Power Switch located on the
KX-A16.
OApproximately 24 hours are required to
recharge the KX-A16.
@The KX-A16 will work for approximately 4
hours (on the average) in the event of a power
failure.
l
The Battery life is 3 years.
l
A simple way to check the KX-A16 is to
disconnect the KX-T61610 and the KX-A16
from the AC outlets, and then observe if the
KX-T61610 operates.
elf
the KX-T61610 does not operate, recharge
the KX-A16.
eAC Primary Fuse, (250 V, 1.25 A)xl:
Replace the fuse which is in the fuse
hold
located on the rear, if the CHARGE Indicate
is off
KX-Al6 ,‘---.-
(Keep the unit CMWJ from heat.)
BATTERY LOW Indicator:
will be lit \vhile recharging
is insfifj5cient.
CHARGE Indicator:
will be lit while the adaptor
is being recharged.
;
- L
1
. . ;
2-15
.:
2 - _ ..-_.,_.-. - _.*_.._ -...--- . _^ , _ 1
_1