Panasonic KX-T61610 Switch User Manual


 
1 AB=[OO]: speed access code 00
r
A---
Fi
tWJWP+W
01
yJ[phone number][MEyORY][END]
-[SELECT]--------I
I--------
until rhe desired speed access code appears
[99]: speed access code 99
CD=[ 91: nutotnatic line access number
[81]: line access number of CO 1
[86]: line access number of CO 6.
[AUTO][NEXT][N][CD][phone number][MEMORY][END]
t-
Description
4. Enter the line access number.
100 phone numbers each with up to 32 digits
may be entered into programming for speed
dialing use from each exretuion.
Pushing rhe “-3c”, “#” “PA USE”, IL--” or
“FLASH” button counts as I digit,
9: for automatic selection
81: for CO 1
82: for CO 2
83: for CO 3
84: for CO 4
8.5: for CO 5
86: for CO 6
Programming
I. Dial (01) or press the A UT0 button to go
inro the speed dialing entry mode.
“SPEED DIALING” will be displayed.
5. Enter the phone number.
0 You may enter punctuations during a
phone number.
2. Press the NEXT button.
“ENTER SPEED CODE” will be displayed.
@To erase a wrong entry, press the CLEAR
button.
3. Dial (00 through 99) or press the NEXT
burron, for speed access code entry.
Example:
When dialing (00) or pressing the NEXT
button.
aThe LCD will show “0O:NOT STORED”
- when nothing is stored in speed access code
“00”. When the automatic line access num-
ber 9 and the phone nutnber 123-456-7890
has been stored, “00: -123-456-7590” will
be displayed.
6. Press the MEMOBY burton.
@The memory indicator will be lit.
7. To program desired speed access code, press
the SELECT button and then dial rhe speed
access co&.
To advance to the next speed access code,
press the NEXT bufton.
To return to the previous speed access code,
press the PREV button.