Filter
Top Products
Holder ,
(see srep 2)
Use 2-conducior ltniring -
1.
Insert the modular plug
of
the exten-
-I
sion line cord (2-conductor wiring)
into the modular jack (marked
--
k
EXT.) on the KX-T61610.
b
2.
Place the cords into Holder.
\
Outer Z pins
(Low and High) will not
be Itsed
for
Standard Telephone.
Vie)%’
of
TEL
Jack
(extension)
R: Ring
T: Tip
To Extensions
*The
max.
length
of the
extension line cord that connects the KX-T61610 and the extension is shown below.
26 AWG: Under 2290
feet
24 AWG: Under 3700
feet
22
A WC: Under 5900
feet
"If
a telephone or answering machine with an A-Al relay is connected to the KX-T61610, set the A-Al relay switch
of
the telephone or answering machine to OFF.
Caution
Mis-connection may cause the KX-T61610
to operate improperly.
See “During Installation” page 6-l and “Dun’ng Connection” page 6-2 before connecting.
2-8