[26] [SE&CT] [MEMORY] [NEXT] [SELECT] [MEMORY] [END]
Description
Program rn iag
It is possible to print either outgoing outside calls,
1.
Dial (26).
or outgoing outside toll calls, and/or incoming
outside, calls.
0 VTGOING: ON. . . to print all outgoing
outside calls.
0 VTGOING:
OFF... to stop printing
OUTGOING: TOLL...to print only outgo-
ing outside toll calls
“OUTGOING: ON” will be displayed and
the “ON” will blink.
2. Press the SELECT button to alternate be-
tween the “ON”, “OFF” and “TOLL” and
select the desired mode.
INCOMING: ON... to print incoming out-
side calls
3. Press the MEMORY button.
INCOMING: OFF...to stop printing
The LCD will stop blinking.
\
l
When “OUTGOING: TOLL” is selected,
outgoing outside calls to the phone numbers
which are programmed in “Toll Restriction
Denied Code Assignment” on page 29 are
printed out.
4. Press the NEXT button.
“INCOMING: ON” will be displayed and
the “ON” will blink. ,,
5. Press the SELECT button to alternate be-
tween
“ON” and “OFF” and select the de-
sired mode.
6.
Press the MEMORY button.
The LCD will stop blinking.
*
_.
7. To return to the initial programming mode,
t
press the END button.
Programming Table
See page 41.
-.