Filter
Top Products
I----.ut~til the desired extension number appears
:
I
i------
until the &sired combination appears
1 j
D-PHONE 1,2 . . . . . . . .
default (all 16 extensions)
D-PHONE 1
D-PHONE 2
D-PHONE.
l l
(deny the ringing)
[23] [NEXT] F [SELECT] [MEM,ORY][END]
;3] [NEXT] [AB] [SELECT] [MEMORY] [END]
,________________.__.____
AB=[G+]:
to assign the same on all 16 extensions
[l
I]: on extension 11
[26]: on extension 26
Description
Allows each extension to be programme’
for
fl
receiving calls
from
up to 2 doorphones.
(Doorphone is an option.)
Programming
1. Dial (23).
“DOOR PHONE RCV” will be displayed.
2. Press the NEXT button.
“ENTER EXT NO” will be displayed.
3. Press the NEXT button.
“11: D-PHONE 1, 2” will be displayed and
“1, 2” will blink.
4. Repeat pressing the SELECT button until the
desired combination
of
doorphones (which
are to be connected to that extension) is
displayed.
5. Press the- MEMORY button.
The LCD will stop blinking.
6. Repeat steps 3 to 5, to program the combina-
tion
of
the other extensions.
7. To return to the initial program mode, press
the END button.
Conditions
l
When you start the programming from step 1,
you may dial the desired extension number
instead
of
the NEXT burton at step 3.
*The PREV button allows you to go lo the
previous extension
for
displaying rhe door-
phone assignment.
Example:
*To allow extension 12 to receive from D-
PHONE 2
[23] [NEXT] [12] [SELECT] [SELECT]
[MEMORY] [END]
Programming Table *
See page 6-l 7.
3-32