Filter
Top Products
. . .._..........._._.._
until the desired extension number appears
- dial the CO number
.I
.-
-~- l l .-.a, l
(none). . . . . default (all 16 extensi&ns)
.’ .I
AI
[20][NEXT][NEXT][A...F][MEMORY][END]
or
1
1
[20][NEXT][AB][A.. .F][MEMORY][END]
T
Description
The ringing start time can be delayed on a
designated extension(s) when an incoming call
is received from the CO.
The CO line(s) that you want to delay the ring
start titne can be selected through the pro-
gramming. “Delayed Ringing Count Selection”
page 3-30 should be set.
Programming
6. Repeat 3 to 5, to program the assignment
of
the other extensions.
7. To return to the initial program mode, press
the END button.
Conditions
0 When you start the programming from step P,
you may dial the desired extension number
instead
of
the NEXT button at step 3.
1. Dial (20).
“DELAY RING CO” will be displayed.
2. Press the NEXT button.
“ENTER EXT NO” will be displayed.
eThe PREV button allows you to go to the
previous extension
for
displaying the delayed
ringing assignment.
Programming
Table ,
3. Press the NEXT button.
“11: CO 8 8
l l l l
” will be displayed
and ”
l l l l l l
” will blink.
See page 6-17.
4. Dial the CO numbers to be entered.
The desired combination
of
CO will be
displayed.
To prohibit dialing, press the CLEAR
button instead
of
CO number.
“11: CO . . . . . . . . . . ” will be displayed.
5. Press the MEMORY button.
The LCD will stop blinking.