:.-.--------...---utltil the desired extension nutnber appears
[41] [N [C...H) [MEMORY] [END]
[41] [AB] [C...H] [MEMORY] [END]
-.
,
; .
. . . . . . . . . .._.._..____.__.........
Description Conditions
Through programtning, you canselect which CO
Line is accessed automatically when you dial 9 to
use the “Automatic Line Access” feature or you
use the “Auto CO Hunting” feature.
Program 172 ing
1. Dial (41).
“ENTER EXT NO” will be displayed.
2. Press the NEXT button. ,
“1l:CO 123456” will be displayed and
“123456” will blink.
3. Dial the CO Numbers to be entered.
To cancel the entered CO Number, press the
CLEAR button.
4. Press the MEMORY button.
l
The LCD will stop blinking.
l
When you start the programtning from step 1,
you tnay dial the desired extension nutnber
instead of NEXT button at step 2.
*The PREV button allows you to go to the
previous extension for displaying the CO as-
signment.
5. Repeat steps 2 to 4 to program the assignment
of the other extensions.
6.
To return to the initial programming mode,
press’ the END button.
Programming Table
See the back cover.
-.