Panasonic KX-T61610 Switch User Manual


 
~~-.~-.-.-~~-- until the desired extension number appears
i . .._........ .‘dial the CO number
1’
. . . . . . . . -1.
default (all 16 extensions)
: ,
(CLEAR) ..
--~---..~~~~~-~~~~~~-.--~~- AB=[*]: to assign thesame on all 16 extensions
I.
Description Conditions
Through programming, you can select which
l
When
yen
start the programming from step 1
extensions will ring during the night time on
incoming calis from the Central Ofice.
Programming
1. Dial (10).
you may dial the desired extension numbed .’
instead of the NEXT button at step 3.
*The PREV button allows you to go to the
previous extension for displaying the CO
assignment.
“NIGHT: IN CO” will be displayed.
2. Press the NEXT button.
“ENTER EXT NO” will be displayed.
3. Press the NEXT button.
“11: CO 12 3 4 5 6” will be displayed and
2 3 4 5 6” will blink.
4. Dial the CO numbers to be entered.
The desired combination of CO lines will be
displayed.
To prohibit ringing, press the CLEAR but-
ton instead of the CO number.
“11: CO.....” will be displayed.
5. Press the MEMORY button.
The LCD will stop blinking.
6. Repeat steps 3 to 5, to program the assign-
ment of the other extensions.
7. TO return to the initial program mode, press
the END button.
:i
Example: COMPANY XYZ
Company XYZ would like all incoming calls to
ring at all extensions during the nighttime:
[lOI PJ=‘J-1 [*I VI PI
[31 [41
151 Fl
[MEMORY] [END]
Programming Table
See page 6-1.5.
3-18